AS-AMCP Addressable System Manual Call Point

• Type: Fire Alarm
• Signal Transmission: Wired Alarm
• Certification: CE, ISO, CCC
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: AS-AMCP
• Application: Indoor
• Transmission Mode: Cable
• Product Name: Manual Call Point
• Power Supply: 24VDC
• Standby Current: <300uA
• Alarm Current: <2mA
• Indicator: Red
• Accessory: Reset Key
• Wiring: L1, L2 signal line
• Material: ABS plastic
• Output Type: Normal open contact 0.1A/30VDC
• Standard: EN54-11
• Operating Temperature: -10ºC to +50ºC
• Relative Humidity: ≤95% no condensation
• Dimension: About 90X90X50 mm
• Matched Host: AS-MN3010 and AS-9108E control panel
• Application Places: Office, Factory, Warehouse, Apartment, Hotel, Bank
• Transport Package: Standard Export Cartons
• Trademark: Ansorl
• Origin: China
• HS Code: 8531100000
• Production Capacity: 20000 Pieces Per Month

Product Description

 

AS-AMCP Addressable System Manual Call Point 

Description:

The AS-AMCP manual fire call point is mainly designed to be used with an intelligent two bus control system. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire alarm control system which will, after receiving the alarm signal, display the coded address and the equipment status of the manual fire call point. When the manual fire call point is operating normally, the red indicator will blink; when there is a fire alarm, it will remain lit.

 

Feature:

* It can realize complete electronic coding and in situ rewriting with help of a coder.
* Designed with an upper cover and a lower cover, it can be installed, debugged and maintained conveniently.
* It is designed with a two-wire fire telephone jack and is therefore more applicable to engineering application.
* Designed with passive output contacts, it can control other external equipment directly through an intermediate relay.
* The pressing sheet on the manual fire call points will not get crushed after it is pressed, but can be reset by a special tool, so it can be used repeatedly.


Picture:


Parameters:
 

Product Name	Addressable Manual Call Point
Power Supply	24VDC
Standby Current	<300uA
Alarm Current	<2mA
Indicator	Red
Accessory	Reset Key
Wiring	L1, L2 signal line
Material	ABS plastic
Output Type	Normal open contact 0.1A/30VDC
Standard	EN54-11
Operating Temperature	-10ºC~+50ºC
Relative Humidity	≤95% no condensation
Dimension	About 90X90X50 mm
Matched Host	AS-MN3010 and AS-9108E control panel
Application	Office, factory, warehouse, apartment, hotel, bank, supermarket, shopping mall, school, hospital etc.

Manual Call Point Dimensions:


Manual Call Point Reset and Coding Methods:

Manual Call Point Wirings:




Related Products:

 

ANSORL TECHNOLOGY LIMITED: addressable fire alarm devices
AS-MN3010-100/200/324	Addressable 1 Loop Fire Alarm Panel with 100/200/324 addresses
AS-9108E-2L-16L	Addressable 2 Loops to 16 Loops Fire Alarm Panel (one loop=324 addresses)
AS-ASD102	Addressable Photoelectric Smoke Detector
AS-AHD105	Addressable Heat Detector
AS-ASH107	Addressable Multi Smoke & Heat Detector
AS-AGD109	Addressable Combustible Gas Detector
AS-AMCP	Addressable Manual Call Point
AS-AHS	Addressable Strobe Sounder
AS-AIM	Addressable Zone Input Module
AS-AIO	Addressable IO Control Module
AS-AIS	Short Circuit Isolator
AS-ART	Fire Repeater Panel
AS-F900E	System Programmer
Welcome to contact us for your inquiry !

Factory Corners

Workshop and Warehouse


Mass Production


Package and Shipment


Certificates:


Who We Are ?

ANSORL TECHNOLOGY LTD is a building automatic control system and fire alarm system provider. Over the past years, We have always been dedicated to serving the diverse needs of our customers. Although we started out as a tiny engineering and manufacturing company in China and have grown into a global player in the international safety market, Ansorl continues to work hard to earn your trust and retain your confidence in our product line.

We focuse on providing advanced buidling automatic control system and fire alarm, fire protection system. Ansorl works harder to tailor our solutions to meet your needs.

Ansorl is an ISO 9001:2008 certified manufacturer with number of testing facilities. We are also planning to expand our manufacturing and testing facilities in China to ensure that our products and manufacturing practices continue to meet the highest standards.

We invite you to get to know Ansorl better. Experience the best fire alam technology and solution. We are convinced that you will find Ansorl superior to any other detector company in China. You'll see it in our facilities, in our people, and in the products that Ansorl makes. It's our uncommon commitment to excellence and quality, and to the automation and productivity of our customers.
 

What We Have ?

* Conventional and Addressable fire control panel
* Smoke, heat, gas, flame, beam detector
* Manual call point and pull station
* Audio/visual alarm, strobe horn
* Standalone battery operated fire alarm detectors
* Explosion-proof and weather-proof fire alarm devices
* FM200/CO2 gas extinguishing control system
* Other fire safety products
 

Why Choose Us ?

* Prompt Response.
* Standard Quality Control System.
* Sample & Customized Order Can Be Supported.
* Independant R&D / Manufacturing / Customer Service / Marketing Dept.
* Direct Control On Materials, Production Status, Quality Checking.
* Fast Delivery Time for Standard Products.
* State-of-the-art Technology and Models.
* Waranty Guarrentee.


FAQ:

Are you manufacturer ?
Yes, our factory has more than 10 years production management experience in fire alarm industry.

Do you provide samples ?
Yes, sample for quality test is understandable, tell us your interested models, we will prepare for your study.

How's your product quality ?
Our QC team responsible for the whole quality supervision during production and inspect the goods before shipment.
We've achieved the third party certificates ISO, CE, LPCB etc.

Where are your markets ?
Our customers are from worldwide, covering south/east Asia, south/east Europe, middle east, central/south America and the whole Africa etc.

What kind of shipping methods you choose ?
By international express (DHL, FedEx, UPS, TNT, EMS etc).
By train / by truck /  by air / by sea.

How long can I get the goods ?
Normally it takes 3-8 working days. For customized items or bulk orders, it takes more than 15 working days.

Do you provide warranty ?
We provide 12 months warranty, if any item to be found in quality defects, we will provide replacement or repair services.



Send us your inquiry and get a quote !